This item can only be shipped UPS GROUND.

INSTANT BOND WOOD ADHESIVE THICK

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond Instant Bond Thick viscosity product offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.

Features & Benefits

Fast set - Eliminates clamping or reduces clamp time
Bonds stronger than wood
Excellent heat and solvent-resistance
Unaffected by finishes
Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
2 year shelf life
Triple distilled for purity & consistency
Impact-resistant
No-clog applicator for easy use and waste reduction
Ideal for bonding miter joints on MDF and porous woods
Designed for finish & trim carpentry
High viscosity allows time for positioning parts
MIL Spec (A46050C) Type II, Class 3

Application Guidelines

Application Temperature:: Above 50°F (10°C)

Cure Speed:: 10 second handling, 8 second set, 30 second cure. *Full cure in 8 hours.

Service Temperature Range:: -65°F to 200°F

Cleanup:: Use acetone. Follow solvent vendor’s precautions.

Limitations:: Titebond Instant Bond Thick Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.